Proper use of electric screwdrivers

When using an electric screwdriver, you need to follow the correct steps to ensure safety and efficiency. The following are the correct steps for using an electric screwdriver:

1. Preparation: Make sure the electric screwdriver and screwdriver are compatible, select the appropriate screwdriver, and make sure the electric screwdriver is in the off position.

2. SAFETY EQUIPMENT: Wear appropriate personal protective equipment such as safety glasses and gloves to protect yourself from accidental injury.

3. Insert the screw head: Insert the selected screw head into the head of the electric screwdriver and make sure the screw head is securely installed.

4. Adjust Torque: Adjust the torque setting of the electric screwdriver as needed to ensure the proper torque is applied to tighten the screw.

5. Align Screw Holes: Align the screw heads of the electric screwdriver with the screw holes and make sure the angles are correct.

6. Turn on the electric screwdriver: Press the start button to rotate the electric screwdriver and begin tightening or loosening the screw.

7. control the strength: in the operation process, to control the strength, to avoid excessive force or too light, so as not to damage the screw or workpiece.

8. Finish the operation: After finishing tightening or loosening the screw, release the start button and wait until the screw head stops rotating before removing the electric screwdriver.

9. Cleaning and storage: After use, clean the surface of the electric screwdriver and the screw head to ensure that they are clean and free of debris. Store the electric screwdriver in a dry and well-ventilated place to avoid moisture and damage.

These are the proper steps for using an electric screwdriver, and following these steps will ensure that the job is done safely and effectively. In the use of electric screwdriver, must pay attention to safety, follow the operating procedures, to ensure the safety of themselves and others.